Premium 3D Printer Filament PLA-spool | 1 kg/spool - Black 1.75 mm 1 kg

Premium 3D Printer Filament PLA-spool | 1 kg/spool - Black 1.75 mm 1 kg
Brand: Monoprice
Color: Black
Size: 1.75 mm
22.99 GBP
Buy Now

Get outstanding 3D printing results when you use 1.75mm or 3.0mm PLA 3D Printer Filament from Monoprice™!PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle.This 1 kg spool features a thickness of 1.75mm or 3.0mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 185° C (365°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament.The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot.Features:1.75mm or 3.0mm x 0.10mm PLA filament with roundness variation of less than 0.03mmIt has a nominal processing temperature of 185° C (365°F)195mm reel diameter, 95mm hub diameter, 38mm spindle diameter, 80mm reel width1 Kg reelExtrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%)PLA is a plant-based plastic, which means that it is biodegradable and gives off a slightly sweet odor, like roasting corn Filament TypeMonoprice™ PLAPrint Temperature (°C)190-210Bed Temperature (°C)No Heat (60-80)Density (g/cm3)1.24Distortion Temperature (°C, 0.45 MPa)56Melt Flow Index (g/10 min)5 (190°C/2.16kg)Tensile Strength (MPa)65Elongation at Break (%)8Bending Strength (MPa)97Flexural Modulus (MPa)3600IZOD Impact Strength (kJ/m2)4 Support Files:Filament Comparison Chart