Quantura 200s Providing the same features and specification as our Quantura 200 System, the Quantura 200S dosing system is for customers who use a solid powder fed system. Quantura 200S is suitable for dosing two products into a wide range of commercial dishwashers including conveyor, hood and door type dishwashing machines. In place of the peristaltic detergent pump, the Quantura 200S has an electrically operated solenoid valve that works in conjunction with a powder bowl system. The integrated second peristaltic pump ensures the accurate and consistent dosing of rinse aid. Quantura 200S overview: -Easy installation and set-up -One system for Probe Mode, Probeless Conveyor Mode, Probeless Head/Door Mode -High-quality brushless DC motors -Pump status lights and on/off indication light -Super low flow rates -Full text LCD in nine different languages -Secure Access Code Option Installation components Standard installation kit (Q200) includes: -Suction/delivery tubing (LPDE). -Detergent injector. -Rinse aid injector and adaptor (with integral non-return valve). 1/8 BSP thread. -Tube stiffener. -Fixings pack. Quantura probe: Conductive probe -Monitor and control the detergent level in the dishwasher with Brightwell Dispensers’ new temperature compensated conductive probe. The conductive probe consists of electrodes which are in direct contact with the detergent solution. The conductivity measured between the electrodes is directly proportional to the detergent concentration of the solution, allowing automatic control of accurate detergent dosing. Peristaltic tubes -Peristaltic pump tubes are critical to the performance of a dosing system. Using their extensive, on-site experience, Brightwell Dispensers has worked closely with customers to provide the best solution. BrightChem Tube: Brightwell Dispensers’ proprietary co-extruded double strength tube is super resistant. The special inner lining ensures that the tube stays robust throughout its life-cycle. Silicone Tube: A robust tube that provides the highest flow rates and is compatible with most standard detergents. Connectors: We also offer a selection of tube connectors to suit a wide range of installations. -Compression fit connectors (as standard) -Barbed fit connectors -Quick connectors Technical Specifications: Power - 100 240VAC, 50/60Hz, Class II, Maximum power consumption: 28W Flow Rates - Detergent flow rate: 30ml/min to 170ml/min (BrightChem tube), Rinse aid flow rate: 3ml/min to 30ml/min (BrightChem tube) Operating Pressures - Detergent: 1 bar, Rinse Aid: Up to 3 bar, Sanitiser: Up to 3 bar Operating Modes - Probe Mode, Probeless Conveyor Mode, Probeless Hood/Door Mode Probe - Temperature compensated conductive probe Control Circuitry - ST Micro ARM Cortex-M3 CPU microprocessor controlled Security access codes Squeeze Tube Fittings - Standard: Compression fittings; Alternative fittings are available on request (minimum order quantities apply) Motor - Brushless 24V DC Solenoid valve - 24V DC (Applicable for Quantura 200S/300S) Product standards - CE marked, Low Voltage Directive (LVD) 2014/35/EU, EMC Directive 2014/30EU, Machinery Directive 2006/42/EC Dimensions - H x W x D = 210mm x 183mm x 115mm Weight - 2.2 kg IP Rating - IP55 Warranty - 2 years Buzzer - 24 V DC max. 500mA (10W) Multilingual Interface - Czech, Dutch, English, French, German, Italian, Polish, Spanish, Portuguese
